page 1 1 2 2 2 2 3 4 4 4 5 6 list list................................................................................................. package outline............................................................................... features.......................................................................................... maximum ratings and electrical characteristics maximum ratings ............................................................................. rating and characteristic curves........................................................ pinning information........................................................................... marking........................................................................................... ................................................................................. suggested thermal profiles for soldering processes............................. high reliability test capabilities........................................................... bulk packing... ................................... bridge rectifier formosa ms 2W005G thru 2w10g http://www.formosams.com/ tel:886-2-22696661 fax:886-2-22696141 document id issued date revised date revision page. ds-242135 2009/08/10 2016/05/17 e 6
page 2 2W005G 2w01g 2w02g 50 100 200 35 70 140 symbols v rrm (v) v rms v r (v) (v) *1 *2 *3 *1 repetitive peak reverse voltage *2 rms voltage *3 continuous reverse voltage *4 maximum forward voltage @i =2.0a f v f (v) *4 2w04g 2w06g 400 600 280 420 -55 to +150 2w08g 2w10g 800 1000 560 700 50 100 200 400 600 800 1000 1.10 bridge rectifier formosa ms (c) o operating temperature t, j http://www.formosams.com/ tel:886-2-22696661 fax:886-2-22696141 document id issued date revised date revision page. features ? ? ? ? lead-free parts for green partner, meet rohs requirements ? suffix "-h" indicates halogen-free parts, ex. 2W005G-h. surge overload rating 60 amperes peak ideal for printed circuit board reliable low cost construction utilizing molded plastic technique results in expensive product parameter conditions forward rectified current forward surge current reverse current i t rating for fusing 2 see fig.1 8.3ms single half sine-wave (jedec methode) symbol min. typ. max. unit i o i fsm i r it 2 a a ua as 2 2.0 60 10.0 v = v t = 25 c r rrm j o v = v t = 100 c r rrm j o 1000 storage temperature t stg o c +175 -65 t < 8.3 ms typical junction capacitance c j pf 15 note 1: measured at 1.0mhz and applied reverse voltage of 4.0v note 1 30 maximum ratings and electrical characteristics (at t =25 a o c unless otherwise noted) 2.0a glass passivated single-phase bridge rectifiers-50-1000v 2W005G thru 2w10g package outline mechanical data ? ? ? ? ? case: potted plastic round body epoxy: ul94-v0 rated flame retardant terminals: solderable per mil-std-750 method 2026 polarity: as marked mounting position: any dimensions in inches and (millimeters) .220(5.6) .200(5.1) .366(9.3) .350(8.9) .921(23.4) min. 1.083(27.5) min. .220(5.6) .180(4.6) .220(5.6) .180(4.6) .032(0.81) .028(0.71) round bridge (wob) ds-242135 2009/08/10 2016/05/17 e 6
page 3 http://www.formosams.com/ tel:886-2-22696661 fax:886-2-22696141 document id issued date revised date revision page. rating and characteristic curves (2W005G thru 2w10g) fig. 3 - typical instantaneour forward characteristics (per leg) instantaneous forward voltage (volts) instantaneous forward current (a) fig.1 - forward current derating curve average forward output current, i (a) f(av) 0 25 50 75 100 125 150 175 200 ambient temperature, t ( c) a 2.4 2.0 1.6 1.2 0.8 0.4 fig. 2 - maximum non-repetitive peak forward surge current peak forward surge current, i (a) fsm number of cycles at 60 hz percent of rated peak reverse voltage ( %) fig. 4 - typical reverse characteristics per leg instantaneous reverse current, i (a) r reverse voltage, v (volts) r junction capacitance, c (pf) j fig. 5 - typical junction capacitance (per leg) f 0 10 20 30 40 50 1 2 5 10 20 50 100 60 single sine-w ave jedec method o u s f o r w a rd curr e nt a m pe r es 0.4 0.6 0.8 1.0 1.2 1.4 0.01 0.1 1.0 10.0 tj=25 typical distribution o 0.01 0.1 1.0 10 0 40 60 100 140 20 tj=25 tj=100 1.0 2.0 4.0 6.0 10 20 40 60 100 0.1 1.0 2.0 4.0 10 20 40 100 0.2 0.4 tj 25 =, f=1m hz v sig= 50m p-p 120 80 ds-242135 2009/08/10 2016/05/17 e 6
pinning information simplified outline symbol marking type number marking code 2W005G 2W005G 2w01g 2w01g 2w02g 2w02g 2w04g 2w04g 2w06g 2w06g 2w08g 2w08g 2w10g 2w10g page 4 bridge rectifier formosa ms http://www.formosams.com/ tel:886-2-22696661 fax:886-2-22696141 + ~~ document id issued date revised date revision page. - 2W005G thru 2w10g bulk packing wob 1,000 230*230*49 490*240*310 10,000 13.3 package box inner box carton size carton approx. gross weight (kg) (pcs) (m/m) (m/m) (pcs) ds-242135 2009/08/10 2016/05/17 e 6
page 5 bridge rectifier formosa ms http://www.formosams.com/ tel:886-2-22696661 fax:886-2-22696141 document id issued date revised date revision page. suggested thermal profiles for soldering processes temperature(c) 1.lead free temperature profile wave-soldering 0 20 40 60 80 100 120 140 160 180 200 220 240 time(sec) 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 preheat max gradient 2oc/s peak max well time 5 max cool down max gradient-4oc/s suggested gradient 2oc/s or less - peak soldering temperature not to exceed 260oc 2W005G thru 2w10g ds-242135 2009/08/10 2016/05/17 e 6
page 6 bridge rectifier formosa ms http://www.formosams.com/ tel:886-2-22696661 fax:886-2-22696141 document id issued date revised date revision page. 1. solder resistance 2. solderability 3. high temperature reverse bias 4. forward operation life 5. intermittent operation life 6. pressure cooker 7. temperature cycling 8. forward surge 9. humidity 10. high temperature storage life at 260 5 for 10 2sec. immerse body into solder 1/16" 1/32" at 245 5 for 5 sec. v =80% rate at t =150 for 168 hrs. rated average rectifier current at t =25 for 500hrs. t = 25 c, i = i on state: power on for 5 min. off state: power off for 5 min. on and off for 500 cycles. 15p at t =121 for 4 hrs. -55 to +125 dwelled for 30 min. and transferred for 5min. total 10 cycles. 8.3ms single half sine-wave s, one surge. at t =85 , rh=85% for 1000hrs. at 175 for 1000 hrs. c c c c c cc c c o o o o o oo o o rj a afo sig a a o mil-std-750d method-2031 mil-std-202f method-208 mil-std-750d method-1038 mil-std-750d method-1027 mil-std-750d method-1036 jesd22-a102 mil-std-750d method-1051 mil-std-750d method-4066-2 mil-std-750d method-1021 mil-std-750d method-1031 item test conditions reference high reliability test capabilities 2W005G thru 2w10g ds-242135 2009/08/10 2016/05/17 e 6
|
